KEY-No.4 Emulsion Remover Powder

Product Application

KEY-No.4 Emulsion Remover Powder, designed to strip photosensitive emulsion from screen printing meshes, enabling reuse of screens and effectively reducing production costs.

Product Characteristics

White granular crystals

Features of Use

Delivers exceptional stripping performance on solvent-resistant photosensitive emulsions, ensuring complete removal.

Compatible with polyester and stainless steel screens, causing no damage to the screen and maintaining its service life.

Features rapid film stripping speed, significantly boosting production efficiency.

Instructions for Use

1. Add this product to 8-10 liters of clean water and stir thoroughly until completely dissolved to prepare the film-stripping solution.

2. Apply the film-stripping solution evenly to both the P-side and S-side of the screen using a sponge or cloth, or immerse the screen directly into the solution tank. Allow it to react for 2-3 minutes. Before the solution dries, rinse the screen with a high-pressure water jet until the photosensitive emulsion is completely removed.

3. Before film removal, thoroughly clean any residual ink from the screen surface.

Important Notes

Store this product in a sealed container in a dry, dark, and well-ventilated area to prevent moisture damage.

This product may irritate the skin; protective measures are recommended during handling.

If accidental skin contact occurs, immediately rinse thoroughly with copious amounts of water.

Packaging Specifications

1 kg /can (24 cans /box)

Storage and Transportation

Transport using clean trucks. Stack individual packages no higher than five layers, with the bottom layer secured on anti-slip pallets to prevent crushing, deformation, or tipping.

Ensure proper sealing, avoid direct sunlight, and keep away from high heat.

Unopened shelf life: 12 months.