
KEY-YS/3 Single-Component Screen Adhesive
Product Application
Purpose: For bonding the screen fabric to the frame during screen printing.
Characteristics: Yellow gel-like adhesive.
Product Features
Gel-like, single-component, easy to use, cost-effective.
Excellent smoothness, fast drying speed, superior workability.
Exceptionally strong horizontal tensile strength, maintains high mesh tension stability after stretching.
Instructions for Use
Customers may add an appropriate amount of solvent to dilute this product based on usage requirements.
New Screen Frames:
First inspect the frame for flatness. The surface must be smooth and free of burrs. Then apply a layer of screen adhesive to the prepared surface of the frame using a brush. (Note: The base coat should not be too thick. Allow it to dry completely before proceeding with screen stretching.)
Used Screen Frames:
Use the same type of screen adhesive. Simply remove the old screen, inspect the frame for flatness, and proceed directly with stretching the new screen.
If using a different adhesive, the base layer must be thoroughly removed (as mixing adhesives may cause mesh detachment). Subsequent steps follow the new frame procedure. After stretching the mesh, apply adhesive while ensuring tight contact between frame and mesh. Before the adhesive fully dries, use a squeegee to press it firmly into place. A fan may be used to accelerate drying, which typically takes about 20 minutes.
Important Notes
After use, tightly close the cap to prevent evaporation and store in a cool, dark, well-ventilated area.
This product contains volatile solvents. Ensure adequate ventilation during use and wear gloves and a mask.
This product is flammable. Keep away from sources of ignition.
Packaging Specifications
900 ml /can (24 cans /case)
Storage and Transportation
Transport using clean trucks. Stack individual packages no higher than five layers, with the bottom layer secured using anti-slip pallets to prevent crushing, deformation, or tipping.
Ensure proper sealing, avoid direct sunlight, and keep away from high heat.
Unopened shelf life: 12 months.
Shenzhen Varmia Technology Co., Ltd.
Address: Building A, Da Wan Cultural Plaza, No. 4128
Dongcheng Huan Road, Malan Subdistrict, Pingshan District, Shenzhen
Tel: 0755-27659820
Fax: 0755-27659830
Mobile: 13302956659 (Mr. Wang)
Email: hmy-tech@163.com
Shenzhen Varmia Technology Co., Ltd. (Longgang Branch)
Address: 2nd Floor, Building 12, Anbo Technology Industrial Park,
Baolong 4th Road, Baolong Avenue, Longgang District, Shenzhen
Tel: 0755-27659820
Fax: 0755-27659830
Mobile: 13392832759 (Ms. Jin)
Email: hmy_jinjing@yeah.net
Copyright @ 2018 ShenZehn Varmia Technology Co.,Ltd Te:0755-27659820 Fax:0755-27659830
Address: Building A, Dawan Culture Plaza, No. 4128 Dongcheng Ring Road, Mawei Street, Pingshan District, Shenzhen Mailbox:hmy-tech@163.com